XCMG XCA200L8 all-terrain crane
Xinzhuanm Shanghai
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 186 572...
+86 186 5728 7283
52 m
China, Xinzhuanm Shanghai
100,000 kg
Lifting height
101 m
China, Shanghai
900,000 kg
China, Xinzhuanm Shanghai
50,000 kg
Lifting height
48.5 m
China, Shanghai
31,750 kg
China, Shanghai
600,000 kg
Lifting height
90 m
China, Hang Zhou Shi
100,000 kg
China, Shanghai
199,989 kg
Lifting height
105.004 m
China, Shanghai, Jinshan District
China, Shanghai, Jinshan District
China, Shanghai, Jinshan District
50.5 m
China, Xinzhuanm Shanghai
92.5 m
China, Hang Zhou Shi
China, Shanghai
China, Hang Zhou Shi
All-terrain crane parts
1. Core Lifting Performance
Maximum Rated Lifting Capacity: 200 t
Maximum Lifting Moment (Basic Boom): 7800 kN·m
Main Boom Configuration: 8-section high-strength steel U-shaped telescopic boom
Main Boom Length Range: 13.7 m ~ 88 m (fully extended maximum main boom length: 88 m)
Maximum Lifting Height (Main Boom Only): 88 m
Maximum Lifting Height (Main + Auxiliary Boom): 115 m (with 36 m ultra-long auxiliary boom)
Minimum Working Radius (Boom Radius): 3 m
Maximum Working Radius (Fully Extended Main Boom): 70 m
Auxiliary Boom Options: 20 m standard jib / 36 m ultra-long jib (supports 0°/20°/40° installation angles)
Rated Capacity at End of Fully Extended Main Boom (Max Radius): 12 t
Rated Capacity at Minimum Radius (3 m): 200 t
2. Hoisting & Operation System
Main Hoist No-Load Lifting Speed: ≥130 m/min
Main Hoist Full-Load Lifting Speed: ≥45 m/min
Auxiliary Hoist Lifting Speed: ≥110 m/min (no-load)
Slewing Speed Range: 0 ~ 1.5 r/min
Main Boom Full Telescoping Time: ≤180 s
Boom Luffing Time (Full Raise): ≤80 s
Control System: Full hydraulic proportional control, intelligent load moment limiter (LML), CAN bus intelligent control system
Outrigger Span (Full Extension): 9.0 m × 9.0 m
Outrigger Span (Half Extension): 6.0 m × 7.8 m
3. Chassis & Travel Performance
Chassis Configuration: 5-axle all-terrain chassis, 10×8×10 all-wheel drive, all-wheel steering
Maximum Travel Speed: 80 ~ 84 km/h
Maximum Gradeability: 65%
Minimum Turning Radius: ≤12 m
Minimum Ground Clearance: 350 mm
Approach/Departure Angle: 20° / 18°
Total Vehicle Mass (Transport State, with Partial Counterweight): 55,000 kg
Axle Load (Transport State): 11,000 kg per axle (compliant with road transport regulations)
Tire Specification: 445/95 R25 heavy-duty engineering tires
4. Counterweight & Structural System
Maximum Counterweight: 76,000 kg (76 t)
Counterweight Design: Modular self-assembly system, supports automatic loading/unloading without auxiliary cranes
Counterweight Transport Configuration: Can carry 20 t counterweight for road transfer, meeting road load limits
Overall Dimensions (Transport State): 15,800 mm (L) × 3,000 mm (W) × 4,000 mm (H)
5. Power System
Chassis Engine: Weichai WP13.540E62 / Cummins X12 series, Euro VI / National VI emission standard
Chassis Rated Power: 405 kW (540 HP)
Superstructure Engine: Cummins QSB6.7 series, 176 kW (240 HP)
Fuel Tank Capacity: 600 L (chassis) + 300 L (superstructure)
Transmission: 12-speed automatic gearbox, multi-mode drive switching (4WD/8WD/10WD)