Hydra Joy 3 Geo drilling rig
≈ €184,800
Zabrze
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
+48 577 81...
Show
+48 577 810 804
Poland, Bogucin
50 m
Poland, Oleśnica
200 m
Poland, Krakow
46 m
China, Xuzhou
102 m
China, Xuzhou
56 m
China, Xuzhou
94 m
China, Xuzhou
150 m
Czechia
61 m
China, Xuzhou
United Kingdom, Billingham
72 m
China, Xuzhou
56 m
China, Xuzhou
44 m
China, Xuzhou
sampling with undisturbed structure in unconsolidated soils
drilling with augers and casing pipes
drilling using water, foam, and drilling mud
wireline and conventional core drilling
geotechnical drilling
drilling with top hammer and down-the-hole (DTH) hammer
Undercarriage:
crawler-mounted
Main Frame:
constructed from S275JR steel profiles (EN 10027-1)
equipped with 4 hydraulic stabilizers permanently mounted to the frame
Key Components:
mast raising cylinder
mast lifting cylinder with 500 mm stroke
diesel engine, 125 kW, Stage V, liquid-cooled
hydraulic pump with load sensing system
fuel tank
hydraulic oil tank with filter
oil and fuel level indicators
Control Systems:
engine control panel
drilling rig control panel
wireless remote control for full rig operation
Mast:
lifting capacity: 9 tons
Rotary Head TR 900 with floating spindle:
max torque: 900 daNm
rotation speed: 200 rpm
number of gears: 2
head clearance: 1.5"
Additional Equipment:
hydraulic winch – 3 tons
screw-type mud pump:
max flow rate: 600 l/min
max pressure: 20 bar
high-pressure foam/water pump with rig washing system
rod carousel for 33 rods (L = 3000 mm)
Included in the set:
4" down-the-hole hammer – 1 pc
drilling rods 89 mm, 2 3/8" IF, L = 3000 mm – 50 pcs
drilling rods 89 mm, 2 3/8" IF, L = 2000 mm – 33 pcs
Rotex casing pipes 152 mm, L = 2000 mm – 10 pcs
Archonex system – 1 set
auger drilling set
------------------------------------------------------------------------------------------------------------------------------------
Wielozadaniowe urządzenie wiertnicze przeznaczone do:
- pobierania prób o nienaruszonej strukturze w skałach luźnych
- wiercenie świdrami spiralnymi i rurowymi
- wiercenie przy użyciu wody, piany i płuczki
- wiercenie rdzeniowe wrzutowe i tradycyjne
- wykonywanie otworów geotechnicznych
- wiercenie z zastosowaniem młotka udarowego górnego i dolnego
Powozie gąsienicowe.
Rama nośna - wykonana z profili stalowych typu S275JR EN 10027-1, rama wyposażona w podpory hydrauliczne 4szt. zamontowane na stałe do ramy
- siłownik stawiania masztu
- siłownik podnoszący maszt o skoku 500mm
- silnik wysokoprężny 125 kW Stage V, chłodzony cieczą
- pompa hydrauliczna wyposażona w system loan sensing
- zbiornik paliwa
- zbiornik oleju z filtrem
- wskaźnik poziomi oleju i paliwa
- panel sterowania silnika
- panel sterowania wiertnicy
- bezprzewodowy panel sterujący całą wiertnicą
- maszt o udźwigu 9 ton
- głowica obrotowa TR 900 z wrzecionem pływającym
1. moment obrotowy max: 900 daNm
2. prędkość obrotowa 200 rpm
3. ilość biegów 2
4. prześwit głowicy 1,5"
- wyciągarka hydrauliczna 3t
- pompa płuczkowa śrubowa
1. wydatek max 600 l/min
2. ciśnienie max 20 bar
Wysokociśnieniowa pompa piana/woda z zestawem do mycia wiertnicy
Magazynek na 33 żerdzie L-3000
W zestawie:
Młotek dolny 4" -1szt
Żerdź wiertnicza 89 2 3/8" IF L-3000 - 50szt.
Żerdź wiertnicza 89 2 3/8" IF L-2000 - 33 szt
Rura rotex 152 L-2000 - 10 szt
Zestaw Archonex - 1szt.
Zestaw Szneków do wiercenia