Index C100 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: INDEX
Control Model: C200-4D Control
Counter Spindle: yes
Driven Tools: yes
Spindle Power: 22 kW
Machine Frame: Cast iron machine frame in vertical bed design
Tool Carrier Guides: Plate guides with high level of rigidity and dampening
Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology
Headstock Design: Thermo-symmetrical design
Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm
Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)
Main Spindle Torque: 50/65 Nm (at 100%/40% max.)
Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN
C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees
Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar
Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm
Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)
Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)
Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N
Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN
Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar
Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)
Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)
Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)
Control System: INDEX C200-4D Control (Modular multi-processor control integrated with Simodrive 611 / Sinumerik 840D), CNC user memory up to 6 MB, Ethernet 10/100 Mbps
Control Panel Screen: 26 cm TFT color flat screen, membrane keyboard in XYZ layout, default display language Dutch
Machine Power Supply: 400V, 50 Hz, 49 kVA connected power, 70 A nominal current, 100 A max. backup fuse
Cooling System: Central water interface for spindles and control cabinet, 8 kW rated net cooling power unit (50Hz/400V)
Machine Enclosure: INDEX standard turquoise RAL 5018 on front sliding hood (stainless structural steel), dust-grey RAL 7037 on switchgear/fluid cabinets and chip conveyor
Collet Chuck (Main Spindle): Size 5 for draw-type collet clamping on D42 spindle (SK42BZI/900 442...)
Counter Spindle Clamping: Ortlieb Power Chuck KSFI 40-054 with end stop unit including coolant supply
Workpiece Handling: Gantry-type removal unit with actuated gripper (pneumatic swivel/grip), max. workpiece diameter 8-42 mm, max. weight 2 kg, max. remnant length 150 mm
Finished Parts Conveyor: Standard version conveyor discharged on the right-hand side
Chip Disposal: Hinge-type chip conveyor, discharge height 840 mm, with separate coolant tank and reinforced lifting pump (100 l/min)
Coolant System: Prepared for emulsion, low-pressure pump (8 bar / 80 L/min), medium-pressure pump (20 bar / 30 L/min), basic system 600L tank with Profibus interface, coolant microfilter system (compact band filter type KF150, throughput 150 l/min emulsion / 120 l/min oil)
Filter Web: Type PN 100 / 100-540, retaining size 50µm - 60µm, width 540 mm, length 50 meters
Tool Carrier Valves: Coolant high-pressure valves up to 80 bar for tool carriers 1, 2, 3
Extraction Preparation: For coolant mist extraction/filter connection, 200 mm duct diameter, performance approx. 600 m3/h
Additional Functions: Transmit/Tracyl function for face/circumferential milling on C200-4D, MBL 42-65 attachments for control 840D
Bar Loading Magazine: INDEX MBL 42/3700 bar loading magazine, spindle height 1010 mm, bar storage area 390 mm wide, bar diameter 10 - 42 mm, max. bar length 3644 mm, includes hinged bar support with metric scale, bar pusher rod 20D (length 1400mm), and machined guide components 22-42 mm