Sany SY95C tracked excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 183 258...
Show
+86 183 2580 0804
1,850 kg
Digging depth
4.17 m
China
5,700 kg
Digging depth
6.03 m
China
2,150 kg
Digging depth
6.72 m
China
4,200 kg
Digging depth
9.35 m
China
2,850 kg
Digging depth
8.65 m
China
1,800 kg
Digging depth
6.72 m
China
5,600 kg
Digging depth
6.73 m
China
6,200 kg
Digging depth
7.4 m
China
Model: SANY SY95C compact crawler excavator (Tier4 Final / Stage V Export Version)
Operating weight (standard enclosed cab, 450mm steel tracks, standard arm + front dozer blade): 9180 kg
Standard heaped bucket capacity (ISO): 0.38 m³
Track shoe width: 450 mm triple grouser steel tracks; rubber track pads optional
Short rear tail swing radius: 1890 mm
Ground contact pressure: 38.6 kPa
Standard boom length: 3.92 m; Standard stick length: 1.70 m
Engine System
Engine Model: Yanmar 4TNV98CT inline 4-cylinder turbocharged water-cooled diesel
Displacement: 3.30 L
Gross power (ISO 14396 @2000 rpm): 53.7 kW (72 HP)
Max torque: 280 N·m @ 1800 rpm
Emission standard: Tier4 Final / EU Stage V with DPF passive regeneration
Fuel tank capacity: 240 L
Working modes: Power / Economy dual modes + auto idle system for fuel saving
Hydraulic System
Load-sensing flow-sharing hydraulic system
Dual variable displacement piston main pumps
Max total pump flow: 199.5 L/min
Main working relief pressure: 26.3 MPa
Swing circuit relief pressure: 21.5 MPa
Bucket breakout force (ISO): 64.6 kN
Arm breakout force (ISO): 53.5 kN
Independent auxiliary hydraulic circuit pre-installed for breaker, grapple, tilt bucket attachments
Travel & Swing Performance
Low travel speed: 2.9 km/h
High travel speed: 5.0 km/h
Slewing speed: 11 rpm
Maximum drawbar pull: 72 kN
Maximum gradeability: 35° (70%)
Hydraulic automatic track tension adjustment, sealed track chains
Track rollers per side: 5; Carrier rollers per side: 1
Working Range (Standard Boom & Stick)
Maximum digging depth: 4330 mm
Vertical wall digging depth: 3080 mm
Max ground-level horizontal reach: 6660 mm
Maximum digging height: 7250 mm
Maximum dumping height: 5280 mm
Minimum front swing radius: 1990 mm
Front Dozer Blade Parameters
Blade overall width: 2300 mm
Max blade lifting height: 420 mm
Max blade cutting depth: 480 mm
Equipped with float function for flat ground leveling
Overall Transport Dimensions
Total machine length: 6350 mm
Overall machine width (450mm tracks): 2300 mm
Transport height (cab top): 3200 mm
Minimum ground clearance: 360 mm
Track length on ground: 2320 mm
Service Fluid Capacities
Engine lubricating oil: 9.5 L
Coolant total volume: 12.5 L
Hydraulic oil tank capacity: 127 L
Each final drive oil: 1.2 L, two final drives total 2.4 L
Swing gearbox oil: 1.8 L
Operator Cabin & Standard Configuration
ROPS & FOPS certified fully enclosed vibration-isolated operator cabin
Standard factory air conditioning, adjustable high-back suspension seat
Pilot proportional joystick control, two operation patterns switchable
7-inch intelligent color monitor with real-time working data, fuel consumption statistics, fault self-diagnosis & anti-theft lock
Hydraulic safety lock lever, boom & arm load holding valves factory fitted
Sany Intelligent remote fleet monitoring system equipped
Centralized lubrication service points for simple daily maintenance